Browsing Library by Title
Now showing items 2755-2774 of 7484
-
Fabrication And Characeterization Of Granular Magnetic Gold Nanoparticles
(Materials Science & Engineering, 2009-09-16)In recent years, gold and magnetic nanoparticles have showed great potential in biomedical applications. Magnetic nanoparticles can be used in both in- vivo and in-vitro applications such as drug and gene delivery, ... -
Fabrication And Characterization Of Barium Titanate Thin Film On Polycrystalline Nickel Substrate
(Materials Science & Engineering, 2013-10-22)Ferroelectric BaTiO₃(BTO) thin films were deposited on polycrystalline nickel disks and silicon wafer substrates by rf magnetron sputtering. Nickel oxide (NiO) and nanocrystalline nickel (nc-Ni) layers were used as interfacial ... -
Fabrication And Characterization Of Cobalt-Diamond-like-Carbon (Co-DLC) Nanocomposites
(Materials Science & Engineering, 2008-04-22)In recent years, synthesis of magnetic nanocomposites has been receiving significant attention. These nanocomposites offer opportunities to develop active nanomaterials with various applications like magnetic data storage ... -
FABRICATION AND CHARACTERIZATION OF LOW-DENSITY POLYMERIC MATERIALS WITH 3D MICROSTRUCTURES
(2015-12-04)Low-density polymeric materials with octet-truss and quad-truss 3D microstructures were studied. The materials with 3D microstructures were created using digital light processing technology with polyethylene glycol (PEG). ... -
Fabrication And Characterization Of Single Electron Device And Study Of Energy Filtering In Single Electron Transport
(Materials Science & Engineering, 2014-03-12)Single electron devices, in which transport of single electrons is precisely controlled, hold a great promise as important components of future electronic devices and sensors. However, technical challenges have prevented ... -
FABRICATION AND EXAMINATION OF MAGNETIC BACTERIAL CELLULOSE AS A MATERIAL FOR BIOMEDICAL ENGINEERING
(2020-06-08)Bacterial cellulose (BC) is one of the most abundant biopolymers in nature. Several attributes such as facilitative modification, high pore size/porosity, able to mass produce as well as biocompatibility renders BC a ... -
Fabrication and In Vitro Characterization of an Implant for the Detection of Metastatic Cancer Cells
(2018-08-03)Greater than 90% of cancer related deaths are due to metastasis (Hayes & Wicha, 2011). Since current conventional techniques detect the disease by the time that it has become systemic, our lab has developed a hydrogel based ... -
Fabrication And Mechanical Characterization Of A Two-ply Cross Fiber Stent And Fibers Comprising Blends Of Poly(L-lactic Acid)
(Biomedical Engineering, 2007-08-23)Recent studies indicate that stabilization of vulnerable atherosclerotic plaques is critical for minimizing acute coronary syndromes. In this regard a new biodegradable stent design, the Two-ply cross fiber stent, has been ... -
Fabrication and modification of implantable micro-probes for neuro-studies
(2014-09-17)In this work, different types of implantable probes fabricated on Si and polyimide substrates for sensing neurotransmitters, recording extracellular action potentials and stimulating the neurons have been developed. Several ... -
Fabrication Of A Silicon Single Electron Transistor
(Electrical Engineering, 2007-09-17)Single electronics has bright prospects because of its high scalability. The single electron transistor (SET) which utilizes these principles could replace the current workhorse of the industry, the MOSFET. The SET is ... -
Fabrication Of FePt Ferromagnetic Nanoparticles
(Materials Science & Engineering, 2008-08-08)Fabrication of chemically disordered FePt particles ranging from 2 - 9 nm with a precision of 1 nm has been achieved through modification of key process variables including surfactant concentration, heating rates and the ... -
Fabrication Of Micropatterns On 3D Surfaces And Generation Of Linked ZnO Nanowires
(Mechanical Engineering, 2011-07-14)Conventional lithographic approaches are good at fabricating structures on the top surfaces of substrates. They are not suited for 3D surface patterning due to the fact that vertical radiation exposure is employed to ... -
Fabrication Of PLGA Nanocomposite Using Two Photon Polymerization
(Mechanical Engineering, 2010-03-03)The demand of smaller size 3D structures in scale of several nanometers has significantly increased the need of development of new techniques for micro/nano fabrication. Applications of nanomaterial embedded true 3D ... -
Fabrication Of Small Diameter Vascular Graft Using Stacked Collagen Films
(Biomedical Engineering, 2013-03-20)Collagen I have been widely used in the field of vascular tissue engineering. They are characterized better for their interaction at the cellular level but are often limited as vascular graft due to their weak mechanical ... -
FABRICATION OF SOLID POLYMERIC 3D SHAPES FROM PROGRAMMABLE FLAT HYDROGEL SHEETS
(2018-05-24)Modern methods of fabricating three-dimensional (3D) objects include sheet metal forming, thermoforming, and additive manufacturing among others. These methods have their own advantages and disadvantages regarding scalability, ... -
Fabrication of superhydrophobic polystyrene surfaces with tunable adhesion by modulating strain recovery temperature
In this work, different superhydrophobic structures were fabricated on the surfaces of polystyrene (PS) blocks, using oxygen reactive ion etch (ORIE) and controllable strain recovery. The PS used here is a thermal shape ... -
Fabrication Of Superparamagnetic And Ferromagnetic Nanoparticles
(Physics, 2009-09-16)Monodisperse magnetic nanoparticles with controlled size and geometry have drawn great attention in the last decade for fundamental scientific studies and for their potential applications in advanced materials and devices ... -
FABRICATION, CALIBRATION AND CHARACTERIZATION OF MICRO-SCALE RESISTANCE TEMPERATURE DETECTORS
(2016-12-15)Through this research, fabrication, calibration and characterization of micro-scale Resistance Temperature Detector (RTD) were studied. The RTD is meant to sense the temperature at the micro scale level on the hot spot of ... -
Fabrication, Characterization And Hall Mobility Analysis Of MOS Devices With Low-k And High-k Dielectric Materials
(Electrical Engineering, 2007-08-23)Scaling of MOSFETS has led to leakage current problems in SiO2 dielectric based MOSFETS. This has led to the introduction of high-k dielectric materials which can afford greater physical thickness and achieve the same ... -
FACE DETECTION AND RECOGNITION USING MOVING WINDOW ACCUMULATOR WITH VARIOUS DEEP LEARNING ARCHITECTURE
(2018-05-04)Recent advancement in the field of Computer Vision and Deep Learning is making object detection and recognition easier. Hence, growing research activities in the field of deep learning are enabling researchers to find new ...