Browsing Department of Mechanical and Aerospace Engineering by Title
Now showing items 124-143 of 916
-
Cacti- And Shorebirds-inspired Transports Of Liquid Drops And Two Related Fog Collectors
Motivated by what has been used in cacti and shorebirds to directionally manipulate water drops, we have explored two approaches to guide the movement of liquid drops. Based on these approaches, in addition to separating ... -
CAE ANALYSIS ON A FORD ECOBOOST MUSTANG CONNECTING ROD FOR FORGED STEEL, ALUMINUM 7075
(2015-11-24)Connecting rod is high volume production critical component in an automobile engine. Every Internal combustion engine uses a connecting rod. Connecting rod must have highest possible rigidity with lowest possible weight. ... -
Cae Tools For Modeling Inertia And Aerodynamic Properties Of An R/c Airplane
(Mechanical Engineering, 2009-09-16)Recently there has been significant research in the field of Unmanned Aerial Vehicles (UAV). For efficient deployment and operation of these vehicles, it is imperative that one understands the physical system. This in turn ... -
CFD Analysis and Design Optimization of Heat Sink for Oil Immersion Cooling
(2016-05-11)Air cooling is predominant cooling technique employed in most of the data centers. As the demand for High performance computing (HPC) which deploy large concentration of high-end servers (30 kW to 200 kW per rack) is ... -
CFD Analysis Of Direct Evaporative Cooling Zone Of Air-side Economizer For Containerized Data Center
(Mechanical Engineering, 2012-07-25)Conventional data centers are extremely large buildings that have complex power distribution and cooling systems. These traditional brick and mortar data centers employ relatively expensive cooling systems and are inefficient. ... -
CFD Analysis of Thermal Shadowing and Optimization of Heat sinks in 3rd generation Open compute server for single phase immersion cooling applications
(2018-05-24)In today’s networking world, utilization of servers and data center has been increasing significantly. Increasing demands of processing and storage of data causes corresponding increase in power density of servers. The ... -
CFD ANALYSIS OF VAPOR CHAMBER WITH MICRO PILLARS AS HEAT SPREADER FOR HIGH POWER ELECTRONIC DEVICES
(2016-05-10)The recent trend in electronic industry shows that there is large power dissipation from the electronic devices and at the same time their sizes are getting smaller. This large power dissipation takes place in the form of ... -
CFD ANALYSIS ON LIQUID COOLED COLD PLATE USING COPPER NANOPARTICLES
(2020-06-05)In today’s world, most data centres have multiple racks with numerous servers in each of them. The high amount of heat dissipation has become the largest server-level cooling problem for the data centres. The higher ... -
CFD Based Aerodynamic Modeling To Study Flight Dynamics Of A Flapping Wing Micro Air Vehicle
(Aerospace Engineering, 2012-07-25)The demand for small unmanned air vehicles, commonly termed micro air vehicles or MAV's, is rapidly increasing. Driven by applications ranging from civil search-and-rescue missions to military surveillance missions, there ... -
CFD BASED DESIGN AND MODELLING OF WIND FENCE TO MITIGATE HIGH-SPEED WIND LOADING ON A MODULAR DATA CENTER
(2015-12-07)A Modular Data Center (MDC) is a portable method of deploying a data center’s capacity. As an alternative to the traditional data center, an MDC can be placed anywhere data capacity is required. But this comes at the cost ... -
CFD BASED DESIGN AND OPTIMIZATION OF LOUVER BLADE ANGLES TO ENHANCE BETTER AIR FLOW DISTRIBUTION AND IMPROVE THERMAL EFFICIENCY OF IT EQUIPMENT IN DATA CENTERS
(2016-05-13)A data center is a depository which stores, processes and distribute large amounts of data and information using computer systems and associated components for power supplies, cooling systems. Modular data center is a ... -
CFD MODELING AND PARAMETRIC STUDY OF VAPOR CHAMBER AS HEAT SPREADERS FOR HIGH-POWER ELECTRONIC DEVICES
(2015-12-07)Technological developments have resulted in a growing demand for high power electronic devices. Although these high power devices meet the high performance requirements, they also generate a very large amount of heat which ... -
CFD MODELLING OF WET COOLING MEDIA AND DESIGN OPTIMIZATION OF HEAT SINK FOR DATA CENTER APPLICATION
(2016-05-12)Air cooling is most widely used and economical method of currently available cooling technologies in which heat exchanger plays a vital role in facility designs. Evaporative cooling can be energy efficient than mechanical ... -
CFD Optimization of the cooling of Yosemite Open Compute Server
(2017-07-07)Rising energy demands in data centers have constantly made thermal engineers to think and come up with innovative cooling solutions in data centers. It is of utmost importance to have control over the environmental ... -
CFD SIMULATION AND DESIGN OPTIMIZATION TO IMPROVE COOLING PERFORMANCE OF OPEN COMPUTE ‘BIG SUR’ SERVER
(2017-08-02)In recent years, there have been a phenomenal increase in Artificial Intelligence and Machine Learning that require data collection, mining and using data sets to teach computers certain things to learn, analyze image and ... -
Characterization And Cooling Capacity Enhancement Of A Porous Ceramic Wick Based Coldplate
(Mechanical Engineering, 2009-09-16)Current passive cooling methods of aerospace and military, high heat-flux electronics include the use of thermal planes made of exotic metal alloys, which have been designed, at a great expense, to have high thermal ... -
Characterization and Enhancement of Fatigue and Fracture properties in Thermoplastic FFF Parts using In-Situ Annealing
(2021-12-21)Fused filament fabrication (FFF) show high anisotropy and reduced mechanical properties as compared to conventional manufacturing techniques. This happens due to the poor interlaminar bonding between the layers, as a result ... -
CHARACTERIZATION AND ENHANCEMENT OF MECHANICAL PROPERTIES IN THERMOPLASTIC FFF PARTS USING IN-SITU ANNEALING
(2021-08-13)Fused filament fabrication is one of the most common and widely used additive manufacturing techniques. Owing to its ease of use, availability and cheap feedstock it provides a significant advantage over other AM techniques. ... -
Characterization of 3D printed PLA with the help of Mechanical, Di-electric and X-ray Diffraction techniques
(2019-05-17)Additive manufacturing (AM) revolutionized many industries, i.e., Automotive, Biomedical, Aerospace and Defense. As opposed to traditional manufacturing methods, a part is manufactured layer by layer from 3D CAD models in ... -
CHARACTERIZATION OF A COLD PLATE BY EXPERIMENTAL ANALYSIS AND POWER SAVINGS CALCULATION OF DYNAMIC COLD PLATE
(2018-05-23)Cooling is a critical part of data center’s infrastructure, and with ongoing demands in data processing and storage, thermal management issues are of great concern. Some imperative methods of removing heat are either using ...