Browsing by Title
Now showing items 20342-20361 of 24439
-
Static And Dynamic Calibration Of A Multi-component Sidewall Force Balance For A Transonic Ludwieg Tube Wind Tunnel
(Aerospace Engineering, 2012-04-11)Experimentation involving transonic flow requires replicating not only the Mach number but also the Reynolds number. Improper matching of the Reynolds number affects the interaction between the shocks and boundary layer ... -
STATIC AND DYNAMIC FEA ANALYSIS OF A COMPOSITE LEAF SPRING
(2017-01-17)Composite materials are widely used in aeronautical, marine and automotive industries, because of their excellent mechanical properties, low density and ease of manufacture. Due to this increasing trend to utilize composite ... -
Static Response Calibration of 3D Printed Thin Walled Structures Using Fused Deposition Modelling
(2019-12-10)3-D printing has enabled flexible, tool-less fabrication that yields numerous benefits. One benefit is unique and complex structural arrangements that increase design freedom to minimize weight. Such arrangements can be ... -
STATIC SIMULATION OF SURGICAL DRILL END-EFFECTOR WHEN GRIPPED BY FOAM
(University of Texas at Arlington, 2021-05)Often, companies invest significant research into determining the fatigue life of new products. Medtronic has requested an end-effector design for gripping a newly developed surgical drill during fatigue testing. Further, ... -
Stationary And Non-stationary Time Series Prediction Using State Space Model And Pattern-based Approach
(Industrial & Manufacturing Engineering, 2014)The motion-adaptive radiotherapy techniques are promising to deliver ablative radiation doses to tumor with minimal normal tissue exposure by accounting for real-time tumor movement. However, a major challenge of successful ... -
Statistical Analysis Of Compressive Strength Of Clay Brick Masonry Prisms
(Civil & Environmental Engineering, 2007-08-23)The Specification for Masonry Structures section of the current governing masonry design document in the U.S., reported by the Masonry Standards Joint Committee (MSJC), contains tables that can be used to determine the ... -
Statistical Analysis of Fourier Coefficients in a Restricted Harmonic Dial
(University of Texas at ArlingtonDepartment of Mathematics, 1975-04)**Please note that the full text is embargoed** ABSTRACT: Due to the physical nature of certain periodic data, the harmonic dial points (the Fourier coefficients obtained from harmonic analysis of the data) are sometimes ... -
STATISTICAL ANALYSIS OF HOUSEHOLD LABOR SUPPLY: EDUCATION, COLLEGE, AND EARNING POWER
(University of Texas at Arlington, 2018-05)When we look at the general trend in household labor supply, historically we can see that when husbands start earning more, their wives reduce their labor supply. In the last few decades, the number of wives who have ... -
Statistical Analysis Of Indoor UWB Channel Parameters In Different Wall Corridors And Through-wall Environments
The indoor channel parameters appears different for Ultra Wide Band (UWB) systems than it does to narrow band systems. Generally UWB pulses are short and do not overlap in time like multipath sine waves. According to ... -
Statistical Analysis Of Rock Fabrics
(Geology, 2007-08-23)The main goal of the work is to present new procedures for statistical analysis of fabric data for structural geology. After an introduction to the problems of orientation analysis, discussion of different types of the ... -
Statistical Approach To The Development Of A Microscale Model For Estimating Exhaust Emissions Of Light Duty Gasoline Vehicles
(Civil & Environmental Engineering, 2009-09-16)Today, air pollution is taking a growing toll on human health, the environment and the economy, despite decades of efforts to combat it. Although it was once a primary urban phenomenon in industrialized countries, today ... -
STATISTICAL ESTIMATION IN MULTIVARIATE NORMAL DISTRIBUTION WITH A BLOCK OF MISSING OBSERVATIONS
(2017-10-16)Missing observations occur quite often in data analysis. We study a random sample from a multivariate normal distribution with a block of missing observations, here the observations missing is not at random. We use maximum ... -
STATISTICAL META-MODEL FOR AIR TRAFFIC FLOW AND CAPACITY MANAGEMENT BASED ON AIRSPACE OPTIMIZATION-SIMULATION: THE CONTINUOUS CHALLENGE OF THE HUB OF THE AMERICA CONGESTION
(2018-08-31)Panama is only Country on the Americas with a Canal and the hub of Logistics that include the interaction of the Atlantic and the Pacific in a less than a day. This Logistics growth after the Panama Canal Expansion resulted ... -
Statistical Model for Estimating Carbon Dioxide Emissions from a Light-Duty Gasoline Vehicle
(Scientific Research PublishingDepartment of Civil Engineering. The University of Texas at Arlington, 2013-08) -
Statistical Modeling Approach To Airline Revenue Management With Overbooking
(Industrial & Manufacturing Engineering, 2007-08-23)A Revenue Management (RM) method in the airline industry plays a very important role in maximizing revenue under various uncertainty issues, like customer demand, the number of seats to be maintained in inventory, the ... -
STATISTICAL MODELS OF PIPE SERVICE LIFE TOWARDS ARTIFICIAL INTELLIGENCE BASED DECISION SUPPORT
(2020-08-18)In this dissertation, through utilizing various artificial intelligence-based as well as statistical models, an effort has been made to investigate the deterioration of sewer pipes. Once the deterioration rates of sewer ... -
Statistics-based Approaches To Stochastic Optimal Control Problems
(Industrial & Manufacturing Engineering, 2007-08-23)This dissertation develops practical approaches to stochastic optimal control problems in the absence of linear system transition functions, quadratic cost functions, and/or Gaussian random disturbances. In such type of ... -
STEADY STATE AND TRANSIENT ANALYSIS OF HEAT TRANSFER IN A POROUS FIN WITH RADIALLY OUTWARDS PRESSURE-DRIVEN FLOW
(2023-05-31)**Please note that the full text is embargoed until 05/15/2024** ABSTRACT: Thermal management and energy storage problems often utilize extended surfaces, also known as fins for enhanced heat transfer. Today fins are used ... -
Steady state and transient analytical modelling of non-uniform convective cooling of a microprocessor chip due to jet impingement
(2017-05-10)Heat removal from microprocessor chips with multiple regions of dynamic heat generation remains a critical technological challenge. Excessive temperature rise is undesirable for performance as well as reliability. Jet ... -
Stedman Fruit Company
(8/12/2013)