Browsing by Title
Now showing items 5737-5756 of 24439
-
DESIGN AND OPTIMIZATION OF THERMAL MANAGEMENT APPROACHES IN DATA CENTER APPLICATIONS
(2020-01-14)In the present day to day life, Internet of Things (IOT) is everything, i.e., Internet and telecommunication is needed for almost every task of our life, which require data centers. These data centers provide various ... -
Design And Optimization Of Under Tray For Formula SAE Race Car Using CFD Analysis
With the advent of inverted wings to produce down-force in Formula-1 during the 1960's, aerodynamics has played a big role in increasing the vehicle performance. An aerodynamics system consists of front, rear wings and an ... -
DESIGN AND PARAMETRIC ANALYSIS OF FLOW CONTROL DEVICE FOR DYNAMIC COLD PLATE TO OPTIMIZE THE TEMPERATURE FLUCTUATIONS OF THE MULTI-CHIP MODULE
(2016-05-10)Continuing trends of increasing microprocessor power densities and non-uniform temperature distribution pose a significant challenge to the data center cooling. The most usual approach to data center cooling is air cooling ... -
Design And Printed Circuit Board Level Implementation Of A Narrow Band LC VCO
(Electrical Engineering, 2013-03-21)A Voltage Controlled Oscillator (VCO) using a 0.6 μm CMOS technology has been designed and fabricated. The design's tuning range is from 390 MHz to 410 MHz, with the center frequency being 400 MHz. The oscillator is powered ... -
Design and Resistance Factor Calibration of Pipe Piles in California
(2016-05-11)Steel pipe piles, either open ended or close ended, are widely used in the state of California as bridge foundations due to high load bearing capacity, light weight, and outstanding workability. The design methods currently ... -
Design And Simulation Of An Accurate Breast Biopsy System
(Electrical Engineering, 2007-09-17)Core needle biopsy is a non-invasive technique for confirming breast and prostate cancer. Over the years, several non-real time image guided systems have been developed to guide the needle to the target lesion/tumor. ... -
DESIGN AND STIFFNESS OPTIMIZATION OF QUADRI-DIRECTIONAL COMPOSITE GRID LATTICE STRUCTURES
(2016-05-11)Composite grid structures are rib stiffeners connected to each other rigidly in a pattern or a lattice such that the whole grid pattern has certain smeared stiffness property and has a certain structural behavior. The main ... -
Design And Structural Of A Fence Used For Protecting Modular Data Center From High Speed Wind
Various data centers built in an open area are occasionally susceptible to different kinds of natural calamities. Wind, either from any of the sources like hurricane, tornado or storm is one of those ecological dangers ... -
Design And Study Of Phase Locked Loop For Space Applications In Sub-micron CMOS Technology
(Electrical Engineering, 2009-09-16)This work proposes a successful design of a radiation hard phase locked loop (PLL) using Silicon-on-Sapphire CMOS (SOS) technology for space applications. A fully self-bias radiation hard PLL providing frequency of 2.5 GHz ... -
Design And Synthesis Of A High Potential Ruthenium (II) Tetraazatetrapyridopentaphene Complex Capable Of Two-electron Reduction
(Chemistry & Biochemistry, 2010-03-03)We report the synthesis of a complex, [(phen)₂Ru(tatpph)Ru(phen)₂]⁴⁺ (Ph⁴⁺), which like its predecessor compound, [(phen)₂Ru(tatppc)Ru(phen)₂]⁴⁺ (Pc ⁴⁺), can undergo two sequential 1-electron photoreductions in MeCN in ... -
Design And Synthesis Of Flavin-based Organocatalysts For Biomimetic Aerobic Oxidation Reactions
(Chemistry & Biochemistry, 2014-03-12)Oxidation reactions are among the most costly and least selective transformations in synthetic chemistry. Catalytic methods that utilize O₂ as a terminal oxidant strive to reduce the inefficiency in this large area of ... -
The Design Attributes Of Identity In Revitalized Commercial Districts: Implications Of Stakeholders' Perceptions Of The Bishop Arts District
(Landscape Architecture, 2014-07-14)This thesis uses qualitative research methods to study the design attributes of identity in revitalized neighborhood commercial districts. Using the Bishop Arts District as a case study, the thesis analyzes the perceptions ... -
DESIGN CONSIDERATION AND STEADY STATE STUDY OF THRUST BEARINGS IN HIGH SPEED SUBSONIC APPLICATIONS
(2016-05-10)Thrust bearings are required to perform at high speeds in various turbomachinery applications causing the nature of fluid flow within the bearings to be in high subsonic as well as supersonic regimes. The motivation of ... -
DESIGN FOR A VARIABLE PIPE CUTTING JIG
(University of Texas at Arlington, 2015-12)Parker-Hannifin is an aerospace company located in Fort Worth, Texas. A large part of their business entails creating custom metal pipes that are used for aerospace applications. These pipes are all bent and cut at different ... -
DESIGN FOR OLDER ADULTS – FUNCTIONAL LIMITATIONS AND HUMAN FACTORS ENGINEERING
(2021-12-13)Background: Throughout the aging process, people experience changes in functional ability and such changes can happen in physical and mental functions. As a result, older adults develop limitations in their capabilities ... -
Design For Reliability In Microoptelectromechanical Systems (MOEMS)
(Mechanical Engineering, 2008-08-08)Microelectromechanical systems (MEMS) is an enabling technology for miniaturization. MEMS consist of micron sized moving mechanical structures and electronics fabricated on a suitable substrate such as silicon. MEMS has ... -
Design History Meets Digital History: A Classroom Experiment
(2015-04-10)The study of design history supported by the methods of digital humanities scholarship provides an opportunity for designers to experience both history and research in a way that complements their strengths. My graphic ... -
DESIGN OF A CLC TESTBED TO STUDY HIGH VOLTAGE CAPACITORS
(2019-12-06)Pulsed power systems rely on the interconnection of several unique stages for successful implementation. These stages can include, but are not limited to a prime power source, power conditioning circuit, intermediate energy ... -
Design Of A CMOS VCO And Frequency Divider For 5 GHz Applications
(Electrical Engineering, 2007-08-23)This thesis presents the design of a new CMOS Voltage Controlled Oscillator and a frequency divider, both of which form important blocks in the design of a PLL synthesizer. These components are important because they operate ... -
Design Of A Novel Electrostatic Micro Energy Harvester
(Electrical Engineering, 2011-07-14)The batteries have been a major source of energy for the electronic devices. However, the exhaustible nature of the batteries has encouraged the researchers to exploit the renewable energy sources for powering the electronics. ...