Browsing by Title
Now showing items 5760-5779 of 24439
-
Design Of An Enhanced Translinear Variable Floating Resistor And Its Application In A VGA
(Electrical Engineering, 2008-08-08)An improved current controlled floating resistor is designed based on translinear loops for application in a Variable Gain Amplifier (VGA). This work compares the use of two different devices and evaluates the difference ... -
Design Of Analog Correlator For 22-29ghz UWB Vehicular Radar Systems In IBM 90nm CMOS Process
(Electrical Engineering, 2008-09-17)In this thesis analog correlator is designed for UWB vehicular radar system. Operating frequency of the correlator is 22-29GHz. IBM 90nm CMOS process is used for the design, Simulation are done in CADENCE Spectre and ... -
The Design Of CMOS Impulse Generators For Ultra-wideband Communication And Radar Systems
(Electrical Engineering, 2011-10-11)Impulse generators play an important role in the ultra-wideband (UWB) systems. Particularly in the transmitter, impulse generator performs an interface between input data and the antenna determining the overall performance ... -
Design Of Controlled Low Strength Material For Bedding And Backfilling Using High Plasticity Clay
(Civil & Environmental Engineering, 2013-03-20)Flowable fill or Controlled Low Strength Material (CLSM) is a self-compacted cementitious material used in the field in the place of compacted fill. It is also known as unshrinkable fill, controlled density fill, flowable ... -
Design Of Cooling And Ventilation Of Telecommunication Shelter At High Altitude
Telecommunication shelters house information technology (IT), networking, power, and cooling equipment such as racks, power cabinets, batteries, fans, etc. For reliable operation of the IT and networking equipment, shelters ... -
Design of Crack Attenuating Mix using Waste Plastic
(2022-08-10)Plastic has many good properties such as inexpensiveness, light weightedness and durability, but it comes with one major catch i.e., its ‘indestructibility’. Plastic waste is now omnipresent and highlights that all plastic ... -
Design of Digital Social Platform Features and User Well-Being
(2023-05-19)**Please note that the full text is embargoed until 05/14/2025** ABSTRACT: The purpose of the three-essay dissertation is to advance our understanding of the effect of digital social platforms on users’ behavior and ... -
Design Of Embedded NIOS II Processor Based System For Implementing Bridging Algorithm Of Profiling Application
(Electrical Engineering, 2013-03-20)The Texas Department of Transportation (TxDOT) uses multiple instruments for quality assurance of new and existing pavements. These instruments measure the different characteristics of the pavement such as the longitudinal ... -
Design of Embedded Wireless Sensors for Real-Time and In-Situ Strain Sensing of Fiber Reinforced Composites
(DESTech, 2019)**Please note that the full text is embargoed** ABSTRACT: The increasing demand of early detection of barely visible damage inside fiber reinforced polymer (FRP) composites has led to the development of advanced microsensors ... -
Design of flow control device for dynamic cold plate and optimization of servers to decrease junction temperature of heat sinks
(2016-12-19)Electronics cooling research is facing the challenges of high heat flux removal and increased pumping power. Not much attention has been focused related to server and module level cooling. The continued increase in heat ... -
DESIGN OF HAPTICALLY ENABLED WHEELCHAIR FOR ASSISTIVE AUTONOMY
(2018-05-14)The first records of wheeled seats being used for transporting disabled people date to 8th century in China, however the wheelchair has evolved tremendously since its inception. An electric-powered wheelchair, commonly ... -
Design Of Microwave Non-redundant Band-pass Filter Using Microstrip And Edge Coupled Sections
(Electrical Engineering, 2010-03-03)Microwave filler design using the non-redundant method relies on using the quarter wave Unit Elements (U.E's) to create a complex pole and hence augment the filter skirt response as against the redundant method wherein the ... -
Design Of Next Generation Antenna Mounts In Telecommunication Towers With Low Effective Projected Area
Design of new antenna mount with low effective projected area (EPA) and high load carrying capacity for telecommunication towers is the purpose of this thesis. The main aim is to reduce the EPA of the mount against the ... -
Design Of Short Drilled Shaft Foundations In High-plasticity Clay Under Inclined Loading
(Civil & Environmental Engineering, 2011-07-14)Drilled shaft foundations are primarily used to support structures such as bridge piers, towers, buildings, transmission towers, and roadway cable barriers. Generally, the main characteristics of drilled shafts are to ... -
DESIGN OF SINGLE PRECISION FLOATING POINT UNIT (32-BIT NUMBERS) ACCORDING TO IEEE 754 STANDARD USING VERILOG, AND CREATION OF AN EDUCATION MODEL FOR ADVANCED DIGITAL LOGIC AND DESIGN COURSES
(2023-12-11)In today’s day and age of arithmetic, Floating Point Arithmetic is by far the most industry sanctioned way of approximating real number arithmetic for making numerical calculations on all computers used by industries on ... -
DESIGN OF STREAMLINE-TRACED INLETS AND THEIR INTEGRATION WITH ROTATING DETONATION ENGINES
(2021-08-02)This thesis has two parts: 1) design of the streamline-traced inlets (STIs); and 2) integration of STIs with rotating detonation engines (RDEs). The STI design starts with a two-dimensional, isentropic compression flowfield ... -
DESIGN OF THE INTEGRAL PARTS OF A BRIDGE SUBSTRUCTURE TO BE BUILT IN 15 DAYS
(University of Texas at Arlington, 2017-12)Bridges are key elements of our transportation system. They allow one highway to go over another, or over railroad tracks. They allow highways and railroads to pass over water. In any bridge, the components can be separated ... -
Design Optimization And Synthesis Of Manipulators Based On Various Manipulation Indices
(Mechanical Engineering, 2007-08-23)Design optimization of serial manipulators involves striking a balance between an appropriate joint angle and exact link lengths. The optimization technique used in this thesis uses a unique algorithm that optimizes the ... -
Design Optimization Of A Wind Turbine Blade
(Aerospace Engineering, 2011-07-14)This work focuses on designing a blade of 45 meters in length that produces a power of 1.6 MW. The design of the blade was done using the Blade Element Momentum theory and the Prandtl's tip loss factor was used. The ... -
DESIGN OPTIMIZATION OF AN ELASTICALLY SUPPORTED MULTI-BEAM ROTORDYNAMIC SYSTEM TO MINIMIZE FLEXURAL RESPONSE WITH CONSIDERATIONS FOR ROBUSTNESS
(2020-04-08)Modern rotating machines are often required to operate with a small physical footprint and/or overall weight; necessitating that they utilize wide-ranging shaft speed to accomplish needed power levels. It is not uncommon ...