Browsing Library by Author "Nomura, Seiichi"
Now showing items 1-20 of 33
-
A COMPARATIVE STUDY OF WOODEN AND COMPOSITE CROSSARM OF AN ELECTRIC UTILITY POLE
Venkatesh, Amith; 0000-0002-2308-1320 (2017-05-12)Currently, most of the crossarms existing in the nation are made of wood. However, wood has a set of negative features like shorter life span due to environmental cracking, damages by insects and birds. Secondly, an ... -
A Comparison of Discrete Damage Modeling Methods: the Effect of Stacking Sequence on Progressive Failure of the Skin Laminate in a Composite Pi-joint Subject to Pull-off Load
Novak, Joseph Keith; 0000-0001-5832-3935 (2019-05-07)Discrete damage modeling of composite failure mechanisms including delamination, matrix cracking, and their interactions was performed for the skin laminate in a composite pi-joint test specimen subject to a pull-off load. ... -
A mesh based boom to stop oil spread
Visweswaran, Bharathram (2016-05-10)In this work, we develop a new boom to separate oil and water. In a commonly used boom, a membrane that has no pores is normally used to block oil spread. Since this membrane also blocks water flow, high pressure is easy ... -
A MICROMECHNICS APPROACH TO PREDICTING THE ONSET YIELDING ENVELOPE OF PARTICULATE COMPOSITE MATERIALS
Karimi, Behrooz; 0000-0002-0819-6998 (2018-01-05)Composite materials fail for various reasons and extensive research has been conducted both experimentally and theoretically. However, theoretical prediction of composite failure by yielding seems scarce. Adding reinforcing ... -
A STUDY OF ELECTRICAL DOUBLE LAYER AT AN ALUMINUM SURFACE IN AN AUTOMOTIVE COOLING SYSTEM
Deobhankar, Saurabh; 0000-0002-7291-4288 (2016-05-10)Electrolytic corrosion is identified as a major problem which adversely affects the performance of a cooling system and hence compromises the performance of automobile with it. Electrolysis corrosion is a chemical reaction ... -
A Study of Electrical Double Layer Structure over a Corroding Steel Surface in Sea Water
Kale, Pratik Babanrao (2016-05-10)Corrosion is a natural deterioration phenomenon that throws profound adverse effects on the performance of structural steel in marine applications. Seawater consists of various corrosive components such as chlorine ions, ... -
Airy Stress Function For Two Dimensional Inclusion Problems
Kavati, Dharshini Rao (Mechanical Engineering, 2007-08-23)This thesis addresses a problem of finding the elastic fields in a two-dimensional body containing an inhomogeneous inclusion using the Airy stress function which is determined so that the prescribed boundary condition at ... -
An improved method for measurement of radial thermal conductivity of cylindrical bodies
Shaik, Salwa; 0000-0003-3736-5145 (2017-05-10)Li-ion cells are ubiquitously found in day to day electronic devices due to their high power density storage capacity. These batteries are known to exhibit sharp reduction in performance at high temperature. Due to this, ... -
An Open Source APP-HARDWARE setup to control the system for DATA CENTER COOLING
Darekar, Anay Satish (2016-12-20)Control systems for data center cooling exists in the proprietary form and are often sold as part of the overall unit. They provide vital information related to the cooling systems and supply information on the temperature ... -
ANALYSIS OF BLOOD PRESSURE WAVEFORM FOR DETECTION AND DIAGNOSIS OF CARDIOVASCULAR ANOMALIES
Shrotriya, Atul; 0000-0002-5423-043X (2021-12-21)Cardiovascular diseases are the leading cause of mortalities worldwide as well as in the United States. Early diagnosis and prediction of these diseases is critical to mitigate the risks to the patient. A common method to ... -
An Approximate Solution To Buckling Of Plates By The Galerkin Method
Dubey, Yattender Rishi (Mechanical Engineering, 2007-08-23)This thesis presents a semi-analytical method to solve the governing differential equation of plates using the Galerkin method. Symbolic algebra software is extensively used to perform necessary calculations. In this thesis, ... -
Buckling Analysis Of Thin Plates With Or Without A Hole Under Arbitrary Boundary Conditions Using The Galerkin Method
Thirupachoor Comerica, Srider (Mechanical Engineering, 2012-04-11)This thesis demonstrates how to find the critical buckling load value of thin plates with or without a hole under different boundary conditions using the Galerkin method. The use of symbolic software is essential due to ... -
CAE ANALYSIS ON A FORD ECOBOOST MUSTANG CONNECTING ROD FOR FORGED STEEL, ALUMINUM 7075
Keralapura Basavaraju, Shiva Prasad (2015-11-24)Connecting rod is high volume production critical component in an automobile engine. Every Internal combustion engine uses a connecting rod. Connecting rod must have highest possible rigidity with lowest possible weight. ... -
COMPARATIVE CFD ANALYSIS OF THE EFFECT OF AIR AND LIQUID COOLING ON THE FORM FACTOR OF GPU SERVER
Sutaria, Ankit Bharatkumar; 0000-0002-2892-3507 (2019-08-12)Artificial intelligence (AI) has becoming an important area which may significantly impact everyone’s daily life. This means a lot of high-performance chips such as high-performance CPU, GPU, FPGA (Field-programmable gate ... -
COMPARISON OF CARBON STEEL AND COMPOSITE SIDE WALL OF LIGHT RAIL VEHICLE BY FINITE ELEMENT ANALYSIS
Singh, Dilraj; 0000-0001-7931-0076 (2018-05-14)A Railroad car is a vehicle used for carrying passengers and cargo. In the modern era, rail vehicles are designed as lightweight structures with the aim to minimize mass, operational energy demands, and CO2 emissions. Light ... -
COMPARISON OF MECHANICAL BEHAVIOUR OF METALLIC AND COMPOSITE FRONT DOOR OF A STANDARD AUTOMOBILE CAR BY FEA
Thosar, Aniket Chandu; 0000-0003-1862-1246 (2017-05-12)With the advent of technology, materials have advanced many folds; one such technical revelation has been Fiber-reinforced Composite Materials. Composite materials have two major advantages, among many others: improved ... -
Complete Stress Analysis For Two Dimensional Inclusion Problem Using Complex Variables
Patil, Rohan Arun (Mechanical Engineering, 2007-09-17)This thesis addresses the problem of finding stresses and displacements in an infinite plate with a two dimensional circular inclusion with different material properties using complex variable method with biaxial loading ... -
EFFECT OF CENTRIFUGAL FORCE ON THE LOAD CAPACITY OF THRUST GAS BEARING
Haidar, Rakan Mohammed; 0000-0002-2589-0711 (2022-12-12)It has been known for many decades that both rigid and foil thrust bearings are two options in the market for high-speed turbomachinery systems. Their advantages encompass the lower manufacturing cost, the lighter weight, ... -
Finite Element Based Cross-Sectional Buckling Optimization for a Constant Area, Pinned-Pinned Composite Column
Srinivas, Anirudh; 0000-0003-3319-7420 (2016-05-10)In archery, dynamic buckling compromises the target accuracy of arrows. For both dynamic and quasi-static buckling, the buckling load depends on the cross-sectional area moment of inertia, which can be increased by modifying ... -
Finite Element Modeling Of Carbon Nanotube Reinforced Polymer Composites And Evaluating Its Thermal Conductivities
Basavanahalli, Raghuram (Mechanical Engineering, 2007-08-23)High thermal conductivity of carbon nanotubes has motivated us to study and understand the thermal mechanisms in nanocomposites. Though several theoretical models predict a high thermal conductivity for CNT reinforced ...