Browsing Department of Mechanical and Aerospace Engineering by Title
Now showing items 164-183 of 916
-
Comparison of steel and composite leaf springs using FEA
(2018-05-09)Composite materials are widely used in aeronautical, marine and automotive industries, because of their excellent mechanical properties, low density and ease of manufacture. Due to this increasing trend to utilize composite ... -
COMPARISON OF STEEL AND COMPOSITE RAIL AXLE BY FINITE ELEMENT ANALYSIS
(2018-05-16)Axles are one of the most important railway vehicle parts that supports the weight of both vehicle and passenger. Failure in Axle in its operating condition may cause heavy damage to the passenger and car as well, hence ... -
Complete Stress Analysis For Two Dimensional Inclusion Problem Using Complex Variables
(Mechanical Engineering, 2007-09-17)This thesis addresses the problem of finding stresses and displacements in an infinite plate with a two dimensional circular inclusion with different material properties using complex variable method with biaxial loading ... -
COMPLEX MULTIDISCIPLINARY SYSTEM COMPOSITION FOR AEROSPACE VEHICLE CONCEPTUAL DESIGN
(2016-08-15)Although, there exists a vast amount of work concerning the analysis, design, integration of aerospace vehicle systems, there is no standard for how this data and knowledge should be combined in order to create a synthesis ... -
COMPLEX MULTIDISCIPLINARY SYSTEMS DECOMPOSITION FOR AEROSPACE VEHICLE CONCEPTUAL DESIGN AND TECHNOLOGY ACQUISITION
(2016-09-15)Although, the Aerospace and Defense (A&D) industry is a significant contributor to the United States’ economy, national prestige and national security, it experiences significant cost and schedule overruns. This problem ... -
COMPLIANT ROBOT MANIPULATOR FOR TRANSURETHRAL DIAGNOSIS
(2023-06-15)**Please note that the full text is embargoed until 6/14/2025** ABSTRACT: Minimally invasive procedures employ continuum manipulators, however, the internal human anatomy presents challenges relating to size, dexterity, ... -
Composite Materials Equivalent Properties In Lamina, Laminate, And Structure Levels
(Mechanical Engineering, 2014-12)Increasing use of thick composite structures requires a large model for structural analysis. In the analysis, equivalent properties of composites are often used. The equivalent properties of a composite are defined as the ... -
COMPOSITE PLATE OPTIMIZATION WITH STRUCTURAL AND MANUFACTURING CONSTRAINTS
(2017-05-12)This is a design optimization study that focuses on the value of free size optimization technology on composite structures which incorporates realistic structural requirements and practical manufacturing limitations to ... -
Comprehensive Design Analysis Of Thick FR-4 QFN Assemblies For Enhanced Board Level Reliability
Quad Flat No-lead package (QFN) is one of the most cutting-edge technologies emerged in the market, exhibiting high performance and efficiency with unparalleled cost effectiveness. QFN, a leadless package, is an ideal ... -
Compressibility Effects On The Non-linear Receptivity Of Boundary Layers To Dielectric Barrier Discharges
(Aerospace Engineering, 2013-07-22)The reduction of drag and aerodynamic heating caused by boundary layer transition is of central interest for the development of hypersonic vehicles. Receptivity to flow perturbation in the form of Tollmien-Schlichting (TS) ... -
COMPUTATIONAL ANALYSIS FOR THERMAL OPTIMIZATION OF SERVER FOR SINGLE - PHASE IMMERSION COOLING
(2019-05-13)Complete immersion of servers in synthetic dielectric fluids is rapidly becoming a popular technique to minimize the energy consumed by data centers for cooling purposes. In general, immersion cooling offers noteworthy ... -
Computational Analysis Of A Multistage Axial Compressor
(Aerospace Engineering, 2014-07-14)Turbo machines are used extensively in Aerospace, Power Generation, and Oil & Gas Industries. Efficiency of these machines is often an important factor and has led to the continuous effort to improve the design to achieve ... -
COMPUTATIONAL ANALYSIS OF BLAST INDUCED DAMAGE ON NEURONS IN BRAIN DURING TRAUMATIC BRAIN INJURY
(2016-05-10)Concussions are the most common kind of brain injuries, they are also called as mild Traumatic Brain Injuries (mTBI). In recent times, mTBIs are perceived as one of the major health problems faced by millions across the ... -
Computational Analysis of Enhancing Heat Transfer in a 3-D stacked Die Using Different Finned Heat Sink
(2015-12-08)3D die stacking is an exciting new technology that increases the transistor’s density by integrating two or more dies vertically with a dense high – speed interface. The result of 3D die stacking is a significant reduction ... -
Computational Analysis of I.T. Rack Under Vibration Load
(Mechanical Engineering, 2015)Structural failure of a rack due to vibration could result in injury to people, damage to IT equipment, or interruption of services that depend on proper functioning of the IT and networking equipment in the rack. In this ... -
Computational Analysis of Impact Loading on Wafer Level Chip Scale Packages Mounted on Printed Circuit Boards of Varying Thickness
(2016-05-10)In the electronic industry one of the popular package is Chip Scale Package (CSP) due to its small form factor and low cost. To meet the need of new functionality and portability of the recent devices, CSPs’ have been most ... -
Computational Analysis Of Nanostructures Formed In Molten Salt Nanofluids
(Mechanical Engineering, 2014-12)Meeting the continuously increasing demand of `clean' energy is the biggest challenge of the energy research field. Amongst the many renewable sources of energy, energy from the Sun is one of the biggest sources in the ... -
COMPUTATIONAL DESIGN AND FLOW ANALYSIS OF SMART FLOW CONTROL DEVICE FOR DYNAMIC COLD PLATE USED IN COMPUTER SERVER COOLING
(2016-12-19)One of the areas which Electronics cooling research is focusing on is high heat fluxes and non-uniform power distribution. Cooling is always required for maximum junction temperature and as such it is important to mitigate ... -
Computational Flow Analysis Of A Flapping Micro-flyer Wing For Cycle-averaged Force Production
(Mechanical Engineering, 2014-12)Human engineers have been trying long to mimic creations of nature for their own benefits. One such area of interest is the insect based micro flapping wing flyers for their wide employment in commercial as well as military ... -
COMPUTATIONAL FLUID DYNAMICS SIMULATION-BASED ARTIFICIAL NEURAL NETWORK MODELLING FOR DATA CENTER COOLING PREDICTION
(2018-05-22)Continuous provision of quality supply air to data center’s IT pod room is key parameter in assuring effective data center operation without any down time. Due to number of possible operating conditions and non-linear ...