Browsing Department of Mechanical and Aerospace Engineering by Title
Now showing items 336-355 of 916
-
Effective Thermal Management Of Electronic Devices From System To Die Level
(Mechanical Engineering, 2010-07-19)In any electronic device, the resistance to the flow of current through the transistors, interconnects, etc. results in a significant heat generation. If this heat is not removed from the device by providing appropriate ... -
EFFECTIVENESS OF CLOSED-LOOP INVERSE-KINEMATIC LANDMARK NAVIGATION METHOD ON DRIFTING AND HEADING ERRORS OF IMPRECISE MULTI-LEGGED ROBOTS
(2021-05-10)This work addresses the effectiveness of a closed-loop inverse-kinematic control methodology on alleviating drifting and heading errors in the walking and turning of a hexapod robot. Most work in this area focuses on ... -
Effects Of Curvature On The Stresses Of A Curved Laminated Beams Subjected To Bending
(Mechanical Engineering, 2010-07-19)In aircraft structural applications, curved laminated beam structures are often used as part of the internal structure. If the curved composite structure is subjected to bending that tends to flatten or compress the ... -
Effects Of Edge Distance, Hole Size Ratio And Hole Spacing On Peak Stresses Of Composite Laminate With Multiple Holes
(Mechanical Engineering, 2009-09-16)Unlike isotropic material, the stress distribution of laminate with a hole varies with its size, its material properties and fiber orientations of each layer. Moreover, presence of a hole in the neighborhood of another ... -
Effects Of Freezing On The Mechanical Properties Of Engineered Tissues
(Mechanical Engineering, 2010-07-19)Cryopreservation is used to preserve cells and tissues at low temperatures for short and long term uses. Some examples of where cryopreservation is used include the storage of organs, blood, embryos, and artificial tissues. ... -
EFFECTS OF METAL ORGANIC FRAMEWORKS IN POLYETHER BLOCK AMIDE ELASTOMER
(2023-05-19)Metal-organic frameworks (MOFs) are highly porous materials that find extensive applications in gas absorption and separation in recent years. These hybrid materials can be designed with specific pore sizes and voids to ... -
Effects Of Strain Energy Release Rate On Delamination In Temperature Environment
(Aerospace Engineering, 2013-10-22)Delamination is the weakest and major failure mode in laminated composites. Extensive efforts on initiation and growth of delamination under mechanical load have been investigated. A little emphasis was made earlier to ... -
Effects Of Transverse Shear Deformation On Composite Beams With Various Laminate Configurations And Boundary Conditions
Analytical methods are developed for determining deflection of composite beams under transverse load with various boundary conditions and laminate configurations. The present methods include development of expression for ... -
Efficient Method To Cool The Data Center Using Solar Energy
Solar energy is the only source which is abundantly available and which can beused to power a cooling system that is based on absorption cycle.Solar cooling system can be used to provide refrigeration for food and medicinesand ... -
Efficient method to cool the data center using solar energy
(University of Texas at Arlington Libraries, 2015-05)Solar energy is the only source which is abundantly available and which can be used to power a cooling system that is based on absorption cycle. Solar cooling system can be used to provide refrigeration for food and ... -
ELECTRO-PNEUMATIC SHIFTING AND SERVO CONTROL OF A CLUTCH FOR A FSAE RACECAR
(2017-05-24)FSAE is an international student design competition held by SAE International where students design, build and compete in static events like cost, design and dynamic events ranging from acceleration, autocross to endurance. ... -
ELECTROEXTRACTION ACROSS DROPLET-DROPLET INTERFACE
(2019-05-15)Extraction of analytes from solvents is a crucial part of many medical, clinical, industrial and refinery processes. It is required for preconcentration of analytes into other solvents, purification of solvents and detection ... -
Electromagnetic Flow Control: A Review And Experimental Development And Testing Of A Compact Actuator
(Aerospace Engineering, 2009-09-16)This thesis is divided into two sections which both relate to the field of magnetohydrodynamics and particularly electromagnetic flow control (EMFC). The first section contains a review of recent research in EMFC. The ... -
ELECTROSPINNING APPROACH FOR THE IMPROVEMENT OF MECHANICAL AND DIELECTRIC PROPERTIES OF ANISOTROPIC NANOFIBER MAT BY USING A NOVEL FIBER ALIGNMENT TECHNIQUE
(2018-12-05)Many advanced applications, including aerospace, can benefit from materials with superior mechanical and dielectric properties. For these applications, most fiber alignment electrospinning research has focused on either ... -
Electrowetting On Dielectric (EWOD) Digital Microfluidics For Electronic Hotspot Cooling
(Mechanical Engineering, 2010-03-03)Electronics cooling was a field dominated by bulky and heavy heat sinks, heat pipes and fans for decades. Lately, the size of the electronic components has decreased to a substantial extent with an increase in performance. ... -
Electrowetting On Dielectric Digital Microfluidics For 3-dimensional Cell Culture And Chemical Screening
(Mechanical Engineering, 2014-12)Microfluidic devices have allowed improved cell culture studies to be carried out by allowing greater spatiotemporal control over the cell environment while at the same time providing greater throughput, increased automation ... -
ELECTROWETTING-ON-DIELECTRIC (EWOD) DIGITAL MICROFLUIDIC DEVICE FOR SYNTHETIC ORGANIC CHEMISTRY
(2019-11-20)Over the past decades, microscale chemical reaction technology has been attractive in diverse areas of chemistry. It allows the precise control of quantified reagents and highly efficient heat and mass transfer, because ... -
Elimination of surface tension effect on a small plate by developing superwetting surfaces
In this work, we explored the possibility of creating superwetting surfaces, which are defined here as the ones with apparent contact angles less than 5°, using roughness structures for the purpose of eliminating surface ... -
EMBEDDING ANTENNA SHEAR/PRESSURE SENSORS IN PROSTHETIC LINER MATERIAL
(2016-08-26)Published surveys indicated that 40-60% of prosthesis users experience discomfort and skin problems. These studies highlighted the needs for enhanced prosthetic performance and fit. It is extremely difficult to address ... -
ENERGY ANALYSIS OF REAR DOOR HEAT EXCHANGERS IN DATA CENTERS WITH DYNAMIC WORKLOAD DISTRIBUTION
(2022-12-20)In recent years, applications including IoT (Internet of Things), content delivery, and 5G have created a large demand for low-latency access to data processing and data storage. Traditional centralized data centers weren’t ...