Browsing Department of Mechanical and Aerospace Engineering by Author "You, Seung Mun"
Now showing items 1-10 of 10
-
Characterization And Cooling Capacity Enhancement Of A Porous Ceramic Wick Based Coldplate
Salinas, Mauricio Adrian (Mechanical Engineering, 2009-09-16)Current passive cooling methods of aerospace and military, high heat-flux electronics include the use of thermal planes made of exotic metal alloys, which have been designed, at a great expense, to have high thermal ... -
Enhancement Of Pool Boiling Heat Transfer Using Thermally-conductive Microporous Coating Techniques
Kim, Joo Han (Mechanical Engineering, 2007-08-23)The present research is an experimental study of the enhancement of boiling heat transfer using microporous coating techniques. The current research is divided into four major phases. During the first phase, the effects ... -
Evaporative Cooling Performance Of A Brazed Microporous Coating On An Aluminum Surface
King, Ryan M. (Mechanical Engineering, 2012-04-11)The effect of an aluminum microporous coating on evaporative cooling performance was studied using distilled water as the working fluid. The aluminum microporous coating was fabricated by brazing aluminum particles to an ... -
Experimental Investigation Of Flow Boiling And Spray Cooling On Enhanced Surfaces In FC-72
Moreno, Gilberto (Mechanical Engineering, 2009-09-16)In this study the effect of a recently developed, thermally conductive microporous coating on flow boiling and spray cooling performance was studied using FC-72 as the working fluid. The overall goal is to further increase ... -
Experimental Study Of The Effects Of Thermally Conductive Microporous Coatings On Low Heat Flux Pool And Flow Boiling
Mlcak, Matthew (Mechanical Engineering, 2010-11-01)This study examines the effect of the Thermally Conductive Micro-porous Coating (TCMC) developed at the University of Texas at Arlington, on an extended length heater in flow boiling. The study was performed with application ... -
High Temperature Microporous Coatings: The Effects Of Wetting And Wicking On Nucleate Boiling And Chf
Pivovar, Ross Evan (Mechanical Engineering, 2009-09-16)Porous coatings have long been a method to enhance boiling heat transfer. Previous researchers have thoroughly explained most of the physics behind the enhancement, but some holes still exist. Correlations, setup to ... -
Investigation Of Pool Boiling Heat Transfer With Nanofluids
Moreno, Gilberto (Mechanical Engineering, 2007-08-23)This investigation conducts pool boiling experiments under saturated conditions (Tsat=60°C) using nanofluids as coolants. Four different nanofluids were tested including zinc oxide (ZnO)-water, aluminum oxide (Al2O3)-water, ... -
Parameters Affecting Critical Heat Flux Of Nanofluids: Heater Size, Pressure Orientation And Anti-freeze Addition
Kashinath, Madhav Rao (Mechanical Engineering, 2007-08-23)This research aims at investigating the effect, heater size, pressure, heater orientation and effect of anti-freeze addition on critical heat flux of nanofluids which have shown large potentials as coolants for high power ... -
Pool Boiling Heat Transfer Characteristics Of Nanofluids And Nanocoatings
Kwark, Sang Muk (Mechanical Engineering, 2010-03-03)This research is a qualitative and quantitative investigation to understand the behaviors of nanofluids and nanocoated surfaces during pool boiling heat transfer. The pool boiling behavior of low concentration nanofluids, ... -
The Thermal Characteristics Of Liquid-heat-spreader
Kwark, Sang Muk (Mechanical Engineering, 2007-08-23)The present study is an experimental research of a liquid-heat-spreader (LHS) with saturated water at ~2.29 psia. A LHS, indirect liquid cooling module, was successfully fabricated using thin copper blocks and copper tubes ...