Browsing MS Theses - DO NOT EDIT by Title
Now showing items 103-122 of 665
-
Chemoelastoplastic Analysis Of A Copper-graded Silicon Nanorod For Lithium-ion Battery Anode Application
(Mechanical Engineering, 2013-07-22)Lithium-ion batteries are currently widely used in electronics, electrical vehicles and other devices/machines. Along with the mounting demand for much improved performance in these developing technological fields, silicon ... -
Chip Package Interaction Study To Analyze The Mechanical Integrity Of A 3-D TSV Package
The convergence and miniaturization of computing and communications dictates building up rather than out. As planar device miniaturization continues to its ultimate limits, the complexity of circuit interconnections for ... -
Comparative Analysis Of Widely Used Air Containment Systems In Commercial Data Centers For Maximum Cooling Performance
(Mechanical Engineering, 2013-10-22)Many data centers implement containment systems to improve cooling system performance. Literature review shows that Hot Aisle Containment System (HACS) have higher supply air temperature set point than Cold Aisle Containment ... -
COMPARATIVE CFD ANALYSIS OF THE EFFECT OF AIR AND LIQUID COOLING ON THE FORM FACTOR OF GPU SERVER
(2019-08-12)Artificial intelligence (AI) has becoming an important area which may significantly impact everyone’s daily life. This means a lot of high-performance chips such as high-performance CPU, GPU, FPGA (Field-programmable gate ... -
COMPARATIVE RACK LEVEL CFD ANALYSIS OF AIR TO HYBRID COOLING DATA CENTER
(2019-08-12)The demand of data storage in the world is increasing, with this increase, demand for large data centers is growing. In response, we need to look for energy-efficient solutions to reduce the energy consumptions of the data ... -
COMPARATIVE STUDY OF VISCOELASTIC MODELING AND LINEAR MODELING FOR WAFER LEVEL CHIP SCALE PACKAGE UNDER DROP IMPACT
(2017-05-30)Wafer level chip scale packages are one the preferred choice in the electronic industry to meet the need of new miniaturization of the recent devices. It has high efficiency in packaging and has low cost. On the other hand, ... -
COMPARISON OF CARBON STEEL AND COMPOSITE SIDE WALL OF LIGHT RAIL VEHICLE BY FINITE ELEMENT ANALYSIS
(2018-05-14)A Railroad car is a vehicle used for carrying passengers and cargo. In the modern era, rail vehicles are designed as lightweight structures with the aim to minimize mass, operational energy demands, and CO2 emissions. Light ... -
Comparison Of Cooling Performance Of Overhead And Underfloor Supply With Rear Door Heat Exchanger In High Density Data Center Clusters
(Mechanical Engineering, 2008-09-17)The power trend for server systems continues to grow thereby making thermal management of Data centers a very challenging task. Although various configurations exist, the raised floor plenum with Computer Room Air Conditioners ... -
Comparison of Cross-Sectional Profiles for Side Impact Crash Structure in Passenger Vehicle
(2018-05-16)Car’s safety is most important structural criteria while designing an automotive chassis. To protect the occupants from a direct impact, the passenger cabin and the structure of the vehicle should have an appropriate ... -
COMPARISON OF MECHANICAL BEHAVIOUR OF METALLIC AND COMPOSITE FRONT DOOR OF A STANDARD AUTOMOBILE CAR BY FEA
(2017-05-12)With the advent of technology, materials have advanced many folds; one such technical revelation has been Fiber-reinforced Composite Materials. Composite materials have two major advantages, among many others: improved ... -
Comparison of Nonlinear Filters for an Autonomous Lunar Mission using Existing Navigation Techniques
(2018-05-03)Navigation systems play an important role for autonomous spacecraft. Earth based navigation systems such as GPS provide accurate positioning for orbiting spacecraft. In the case of lunar orbit, GPS is not available so ... -
Comparison of steel and composite leaf springs using FEA
(2018-05-09)Composite materials are widely used in aeronautical, marine and automotive industries, because of their excellent mechanical properties, low density and ease of manufacture. Due to this increasing trend to utilize composite ... -
COMPARISON OF STEEL AND COMPOSITE RAIL AXLE BY FINITE ELEMENT ANALYSIS
(2018-05-16)Axles are one of the most important railway vehicle parts that supports the weight of both vehicle and passenger. Failure in Axle in its operating condition may cause heavy damage to the passenger and car as well, hence ... -
Complete Stress Analysis For Two Dimensional Inclusion Problem Using Complex Variables
(Mechanical Engineering, 2007-09-17)This thesis addresses the problem of finding stresses and displacements in an infinite plate with a two dimensional circular inclusion with different material properties using complex variable method with biaxial loading ... -
Composite Materials Equivalent Properties In Lamina, Laminate, And Structure Levels
(Mechanical Engineering, 2014-12)Increasing use of thick composite structures requires a large model for structural analysis. In the analysis, equivalent properties of composites are often used. The equivalent properties of a composite are defined as the ... -
COMPOSITE PLATE OPTIMIZATION WITH STRUCTURAL AND MANUFACTURING CONSTRAINTS
(2017-05-12)This is a design optimization study that focuses on the value of free size optimization technology on composite structures which incorporates realistic structural requirements and practical manufacturing limitations to ... -
Comprehensive Design Analysis Of Thick FR-4 QFN Assemblies For Enhanced Board Level Reliability
Quad Flat No-lead package (QFN) is one of the most cutting-edge technologies emerged in the market, exhibiting high performance and efficiency with unparalleled cost effectiveness. QFN, a leadless package, is an ideal ... -
Compressibility Effects On The Non-linear Receptivity Of Boundary Layers To Dielectric Barrier Discharges
(Aerospace Engineering, 2013-07-22)The reduction of drag and aerodynamic heating caused by boundary layer transition is of central interest for the development of hypersonic vehicles. Receptivity to flow perturbation in the form of Tollmien-Schlichting (TS) ... -
COMPUTATIONAL ANALYSIS FOR THERMAL OPTIMIZATION OF SERVER FOR SINGLE - PHASE IMMERSION COOLING
(2019-05-13)Complete immersion of servers in synthetic dielectric fluids is rapidly becoming a popular technique to minimize the energy consumed by data centers for cooling purposes. In general, immersion cooling offers noteworthy ... -
Computational Analysis Of A Multistage Axial Compressor
(Aerospace Engineering, 2014-07-14)Turbo machines are used extensively in Aerospace, Power Generation, and Oil & Gas Industries. Efficiency of these machines is often an important factor and has led to the continuous effort to improve the design to achieve ...