Browsing MS Theses - DO NOT EDIT by Title
Now showing items 255-274 of 665
-
EFFECTS OF METAL ORGANIC FRAMEWORKS IN POLYETHER BLOCK AMIDE ELASTOMER
(2023-05-19)Metal-organic frameworks (MOFs) are highly porous materials that find extensive applications in gas absorption and separation in recent years. These hybrid materials can be designed with specific pore sizes and voids to ... -
Effects Of Strain Energy Release Rate On Delamination In Temperature Environment
(Aerospace Engineering, 2013-10-22)Delamination is the weakest and major failure mode in laminated composites. Extensive efforts on initiation and growth of delamination under mechanical load have been investigated. A little emphasis was made earlier to ... -
Effects Of Transverse Shear Deformation On Composite Beams With Various Laminate Configurations And Boundary Conditions
Analytical methods are developed for determining deflection of composite beams under transverse load with various boundary conditions and laminate configurations. The present methods include development of expression for ... -
Efficient Method To Cool The Data Center Using Solar Energy
Solar energy is the only source which is abundantly available and which can beused to power a cooling system that is based on absorption cycle.Solar cooling system can be used to provide refrigeration for food and medicinesand ... -
Efficient method to cool the data center using solar energy
(University of Texas at Arlington Libraries, 2015-05)Solar energy is the only source which is abundantly available and which can be used to power a cooling system that is based on absorption cycle. Solar cooling system can be used to provide refrigeration for food and ... -
ELECTRO-PNEUMATIC SHIFTING AND SERVO CONTROL OF A CLUTCH FOR A FSAE RACECAR
(2017-05-24)FSAE is an international student design competition held by SAE International where students design, build and compete in static events like cost, design and dynamic events ranging from acceleration, autocross to endurance. ... -
ELECTROEXTRACTION ACROSS DROPLET-DROPLET INTERFACE
(2019-05-15)Extraction of analytes from solvents is a crucial part of many medical, clinical, industrial and refinery processes. It is required for preconcentration of analytes into other solvents, purification of solvents and detection ... -
Electromagnetic Flow Control: A Review And Experimental Development And Testing Of A Compact Actuator
(Aerospace Engineering, 2009-09-16)This thesis is divided into two sections which both relate to the field of magnetohydrodynamics and particularly electromagnetic flow control (EMFC). The first section contains a review of recent research in EMFC. The ... -
Electrowetting On Dielectric (EWOD) Digital Microfluidics For Electronic Hotspot Cooling
(Mechanical Engineering, 2010-03-03)Electronics cooling was a field dominated by bulky and heavy heat sinks, heat pipes and fans for decades. Lately, the size of the electronic components has decreased to a substantial extent with an increase in performance. ... -
Elimination of surface tension effect on a small plate by developing superwetting surfaces
In this work, we explored the possibility of creating superwetting surfaces, which are defined here as the ones with apparent contact angles less than 5°, using roughness structures for the purpose of eliminating surface ... -
EMBEDDING ANTENNA SHEAR/PRESSURE SENSORS IN PROSTHETIC LINER MATERIAL
(2016-08-26)Published surveys indicated that 40-60% of prosthesis users experience discomfort and skin problems. These studies highlighted the needs for enhanced prosthetic performance and fit. It is extremely difficult to address ... -
ENERGY ANALYSIS OF REAR DOOR HEAT EXCHANGERS IN DATA CENTERS WITH DYNAMIC WORKLOAD DISTRIBUTION
(2022-12-20)In recent years, applications including IoT (Internet of Things), content delivery, and 5G have created a large demand for low-latency access to data processing and data storage. Traditional centralized data centers weren’t ... -
ENERGY HARVESTING DEVICE USING FERROFLUIDS SLUGS IN MICROCHANNELS
(2018-12-14)This research proposes a new concept of energy harvesting with the help of oscillating slugs of ferrofluid in microchannels. Ferrofluids are colloidal suspension of paramagnetic nanoparticles which get magnetized in the ... -
Enhancement Of Cryoinjury By Use Of Eutectic Crystallization Of An Amino Acid Adjuvant
(Mechanical Engineering, 2007-08-23)Enhancement of cryoinjury by use of eutectic formation was investigated to improve the efficacy of cryosurgery. Although the enhancement of cryoinjury associated with eutectic crystallization of sodium chloride (NaCl) has ... -
ENHANCEMENT OF FOG-COLLECTION EFFICIENCY OF A RASCHEL MESH USING SURFACE COATINGS AND GEOMETRIC CHANGES
(2015-12-08)In a few countries, such as Chile, a Raschel mesh is widely used in the field to collect fog. In this work, we explored the possibility of enhancing fog-collection efficiency of a typical Raschel mesh through surface ... -
ENHANCING INDIRECT / DIRECT EVAPORATIVE HEAT EXCHANGER IN DATA CENTER COOLING BY USING PHASE CHANGE MATERIAL
(2017-08-11)Electrical usage in data center continues to grow and recent projection estimate that it contributes 2% in the electricity use in the U.S. One method of controlling the electrical usage during cooling is to reduce or ... -
Enhancing Tensile Strength of FDM parts using Thermal Annealing and Uniaxial Pressure
(2019-01-15)Additive manufacturing has been a revolutionary and disruptive technological development in the field of design and manufacturing with Fused deposition modelling (FDM) being at the forefront of this technology. But it is ... -
Estimation of Fracture Mechanics Parameters In 3D TSV Package During Chip Attachment Process
(2015-11-24)Nowadays, the packaging of electronic products is becoming revolutionized, since the packages are becoming more and more complex, dense, thinner and lighter for greater portability. Miniaturization of packages is being ... -
Evaluating Heat Sink Performance In An Immersion-cooled Server System
(Mechanical Engineering, 2014-09-17)As operating power within server systems continues to increase in support of increased data usage across networks worldwide, it is necessary to explore options outside of traditional air-cooled systems. In this study, a ... -
EVALUATING THE THERMAL PERFORMANCE OF TOPOLOGY OPTIMIZED LOW-COST 3D PRINTED HEAT SINK MADE OF COPPER
(2021-05-09)The performance of a heat sink is highly dependent on the overall surface area available for heat transfer. Designing heat sinks with greater surface areas meant bigger size, weight, and volume of heat-exchanger thus making ...