Browsing MS Theses - DO NOT EDIT by Title
Now showing items 41-60 of 665
-
AN INVASTIGATION OF BAND-LIMITED FLUID DAMPER CONFIGURATION USING LUMPED PARAMETER MODELING
(2015-12-10)Vehicle suspension system is one of the key factors related to the vehicle dynamic characteristic. The fine tuning of suspension system between vehicle handling and ride comfort is not only a trade-off between these two ... -
AN INVESTIGATION OF TOPOLOGY OPTIMIZATION FOR COUPLED THERMO-STRUCTURAL LOADING FOR ADDITIVE MANUFACTURING
(2018-01-12)This work investigates the ability of topology optimization methods to design multifunctional components with coupled thermo-structural loading for fabrication with additive manufacturing technologies. Topology Optimization ... -
An Open Source APP-HARDWARE setup to control the system for DATA CENTER COOLING
(2016-12-20)Control systems for data center cooling exists in the proprietary form and are often sold as part of the overall unit. They provide vital information related to the cooling systems and supply information on the temperature ... -
ANALYSIS AND COMPARISON BETWEEN A CONVENTIONAL METAL AND A METAL-COMPOSITE MARINE PROPELLER SHAFT
(2018-05-16)The basic principal of a ship propulsion is the reactive (thrust) force generated by the propellers against the stream of water which forces the ship to propel in the opposite direction. The Shafting system is thus required ... -
Analysis And Design Of A Hypersonic Scramjet Engine With A Starting Mach Number Of 4.00
(Aerospace Engineering, 2008-09-17)When pressures and temperatures become so high in supersonic flight that it is no longer efficient to slow the oncoming flow to subsonic speeds for combustion, a scramjet (supersonic combustion ramjet) is used in place of ... -
Analysis And Design Of A Piezoelectric Micro-actuator
(Mechanical Engineering, 2007-08-23)Micro-grippers are usually fabricated of silicon using traditional semiconductor manufacturing processes and actuated based on thermal energy input causing their temperature to substantially increase and render unsuitable ... -
Analysis And Design Of A Two-wheeled Robot With Multiple User Interface Inputs And Vision Feedback Control
(Mechanical Engineering, 2010-11-01)This thesis describes the development of a small, inexpensive, controllable mobile two-wheeled robot. It also describes the development of a software interface which allows several open- and closed-loop control methods to ... -
Analysis And Optimization Of A Crashworthy Helicopter Seat
(Mechanical Engineering, 2008-08-08)The objective of a crashworthy seat is to improve the survivability of occupants (cockpit and cabin) in helicopter crashes. All modern helicopter seats are equipped with an energy absorber to reduce lumbar spine load during ... -
The Analysis And Testing Of The Quaife Torque-biasing Differential
(Mechanical Engineering, 2011-07-14)The purpose of this thesis is to analyze and test the Quaife torque biasing differential. The differential was modeled mathematically and equations were formulated. Experiments were then performed on a Formula SAE car ... -
Analysis Of A Composite Beam With Unsymmetrical C Crossection
The research work focuses on analysis of composite beam, where a closed form analytical solution was developed to determine the sectional properties of composite beam with unsymmetrical C cross section. The sectional ... -
Analysis of an Artificial Tailplane Icing Flight Test of a High-Wing, Twin-Engine Aircraft
(2016-05-13)The US Air Force Flight Test Center (AFFTC) conducted a civilian, Federal Aviation Administration (FAA) sponsored, evaluation of tailplane icing of a twin-turboprop business transport at Edwards Air Force Base. The flight ... -
ANALYSIS OF BLOOD PRESSURE WAVEFORM FOR DETECTION AND DIAGNOSIS OF CARDIOVASCULAR ANOMALIES
(2021-12-21)Cardiovascular diseases are the leading cause of mortalities worldwide as well as in the United States. Early diagnosis and prediction of these diseases is critical to mitigate the risks to the patient. A common method to ... -
ANALYSIS OF COMPOSITE STRUCTURES WITH CURVATURE UNDER TEMPERATURE ENVIRONMENT
(2017-05-24)Composite structures are frequently exposed to environments with change in temperatures during their service life. The thermal behaviours of the laminated composite structures are more pronounced than that of the structures ... -
ANALYSIS OF ELECTRIC DOUBLE LAYER STRUCTURE FORMED DURING CORROSION OF STEEL PIPES CARRYING POTABLE WATER
(2016-05-10)Corrosion of steel pipes carrying drinking water is a universal issue. It affects human health as the corrosion sediments in these pipes can be toxic and unfit for consumption. Further, the amassing of the corrosion products ... -
ANALYSIS OF GLASS TRANSITION TEMPERATURE OF PCB & SUBSTRATE USING DYNAMIC MECHANICAL ANALYSIS & THERMOMECHANICAL ANALYSIS
(2020-12-22)Electronic Packaging materials and their properties examines the array of packaging architecture, outlining the classification of materials and their use for various tasks requiring performance over time. Glass transition ... -
Analysis Of Laminated Tubular Structure Under Torsion
(Aerospace Engineering, 2012-04-11)Laminated composite shells in particular are prominent in bearing various types of loads and are hence used in many engineering structures. The analysis of laminated composites is quite complicated since the material ... -
Analysis Of Tapered Laminated Composite Tubes Under Tension And Torsion
(Mechanical Engineering, 2007-08-23)Closed form expressions for determining the displacement and twisting angle of tapered composite tubes are developed. The analytical expressions are developed based on the modified laminated plate theory which includes the ... -
Analysis Of Thrust Development In A Pulse Detonaton Engine
(Aerospace Engineering, 2010-07-19)Pulse detonation engines (PDE) employ detonation waves to compress and burn the fuel and oxidizer mixture which results in the release of high pressure and temperature. The objective of the present study is to analytically ... -
Analytical Method For Analyzing C-channel Stiffener Made Of Laminate Composite
(Aerospace Engineering, 2013-03-20)Composite materials play the important role in the aviation industry. Conventional materials such as aluminum were replaced by composite material on the main structures. The objective of this study focuses on development ... -
Analytical Modeling Of Helium Turbomachinery Using Fortran 77
(Aerospace Engineering, 2015)Advanced Generation IV modular reactors, including Very High Temperature Reactors (VHTRs), utilize helium as the working fluid, with a potential for high efficiency power production utilizing helium turbomachinery. Helium ...