Search
Now showing items 1-10 of 69
IMPROVING THE IMPINGEMENT COLD PLATE THERMAL DESIGN USING NUMERICAL AND ANALYTICAL APPROACH
(2021-05-15)
Conventional cooling methods for an IC chip uses heat spreader to transfer heat from the chip end of the spreader to the opposite end of the spreader which then uses air or water to remove heat and thereby maintaining the ...
CORRELATION AND EFFECT OF PROCESS PARAMETERS ON THE PROPERTIES OF INCONEL 718 PARTS FABRICATED BY SELECTIVE LASER MELTING USING RESPONSE SURFACE METHOD
(2020-08-10)
Inconel 718 (i.e., IN718) is a nickel-based superalloy that exhibits outstanding tensile and impact-resistant properties, along with good high-temperature corrosion resistance. However, the machinability is poor due to the ...
NUMERICAL ANALYSIS OF IMMERSION COOLING ON A SERVER USING AL2O3/MINERAL OIL NANOFLUID
(2020-08-10)
In the current world, technology has developed significantly, with a massive processing and storage of data, resulting in the high increase in Power Density and Heat Generation of servers, computers and its components in ...
THERMAL DESIGN ANALYSIS OF SERVER CHASSIS MANIFOLDS FOR LIQUID COOLED SERVERS USING CFD
(2021-05-18)
Direct-to-chip liquid cooling is one of the most popular methods in data center thermal management when it comes to cooling high chip power densities. A cold plate-based liquid cooling system contains various components ...
Fixed Wing Aircraft Collision Avoidance Using Collision Cone Theory
(2022-08-12)
This thesis develops the guidance and control components of an aircraft collision avoidance system, using a collision cone-based approach. These guidance and control laws are developed by considering the nonlinear relative ...
CONCEPTUAL GAS TURBINE HYBRID ENGINE DESIGN FOR HIGH SPEED RAIL LOCOMOTIVE PROPULSION
(2022-12-16)
The modern experimental jet train developed by Bombardier Transportation was designed to partner with the present day electrified Acela high speed trains. The Jet train would provide transportation to areas (Rural etc.), ...
Numerical analysis of hybrid server immersed in synthetic dielectric fluid
(2022-12-19)
In recent years there has been a phenomenal development in cloud computing, networking, virtualization, and storage, which has increased the demand for data centers. With this increase, there is a demand for higher CPU ...
Thermally charging capacitor: A new protocol to accurately measure the thermoelectric potential
(2022-12-20)
Harvesting energy from waste heat would benefit in creating sustainable systems. Specifically, thermoelectric energy conversion can be used for low-grade waste heat recovery. However, the efficiency of conventional solid-state ...
EFFECT OF CENTRIFUGAL FORCE ON THE LOAD CAPACITY OF THRUST GAS BEARING
(2022-12-12)
It has been known for many decades that both rigid and foil thrust bearings are two
options in the market for high-speed turbomachinery systems. Their advantages encompass the
lower manufacturing cost, the lighter weight, ...
An Integrated Design Tool for Tow-steered Composite Laminate in Abaqus
(2023-01-02)
The material of choice for contemporary aircraft and its component design over the past few decades has shifted more and more toward fiber-reinforced composites. This is mainly due to the improved strength, lightweight, ...