Browsing MS Theses - DO NOT EDIT by Title
Now showing items 6-25 of 110
-
Cathodic Electrodeposition Of Cadmium Oxide, Zinc Oxide And Mixed Cadmium Oxide-Zinc Oxide Thin Films
(Materials Science & Engineering, 2007-08-23)Cadmium oxide (CdO) and (CdO)x(ZnO)1-x mixed semiconductor films were cathodically electrodeposited for the first time on F-doped SnO2 substrates. The CdO thin films were deposited from an aqueous 0.1 M KCl medium containing ... -
CHARACTERIZATION OF ASPHALT/RECYCLED PLASTIC BLENDS MODIFIED BY EXFOLIATED CLAY NANOPLATELETS
(2021-05-09)There is a renewed interest from federal and state transportation agencies as well as the asphalt industry in developing successful utilization of recycled plastics in asphalt pavements. By incorporating a third material ... -
Characterization Of Fracture Toughness In Amorphous Diamond Like Carbon Thin Films And Coatings
(Materials Science & Engineering, 2015)Any material containing a crack when subjected to a certain amount of load, will eventually fail. This failure of material can be either time consuming (ductile) or instant (brittle) depending on the type of material and ... -
CHARACTERIZATION OF NORMAL AND ABNORMAL BONES BY RAMAN SPECTROSCOPY : ANALYSIS OF MINERAL TO MATRIX RATIO OF BONE USING ADVANCED MATERIALS CHARACTERIZATION TECHNIQUES
(2018-05-18)Bone disorders and disease are associated with multiple factors. Some of the disorders and diseases are difficult to understand because of their unknown root causes. Our goal was to differentiate between normal and genetically ... -
Characterization Of Tantalum Nitride Thin Films By Magnetron Sputtering
(Materials Science & Engineering, 2014-07-14)Tantalum Nitride is chemically inert, oxidation resistant and hard. TaN finds its application as a protective coating on steel due to their excellent wear properties. It has become a very promising diffusion barrier material ... -
Cold Plasma Treatment Of Magnetic Nanoparticles
(Materials Science & Engineering, 2013-10-22)This thesis investigates the application of cold plasma to remove the oleic acid bonded on magnetic nanoparticles: SmCo5 nanoflakes prepared via surfactant assisted high energy ball milling and CoFe2O4 nanoparticles prepared ... -
Compaction Physics Of Solid Additive Blends : A Thermal Properties Study
(Materials Science & Engineering, 2014-03-12)Compacted solid additive blends have attracted the interest of the polymers industry due to their ability to improve processability. However, limited research has been performed to analyze the thermal properties that these ... -
Computer Simulation, Fabrication And Characterization Of Inverse Frustum Nanosphere Metal Arrays For Fiber-based Plasmonic Sensors
(Materials Science & Engineering, 2013-03-20)In recent years, a number of metal nanostructures have attracted huge attention from scientists and researchers for its plasmonic property and surface enhanced Raman scattering effect. They have been utilized to monitor ... -
Corrosion And Hydrogen Embrittlement Of Nanocrystalline Nickel
(Materials Science & Engineering, 2013-07-22)Nanocrystalline (nc) materials have attracted the interest of the scientific community because of their unique physical and mechanical properties. However, limited research has been performed to analyze their electrochemical ... -
Corrosion And Leaching Study Of Low Copper (I) Oxide Paints For Antifouling Application
(Materials Science & Engineering, 2010-03-03)Global environmental concern/economy challenges necessitate innovation of AFP's with novel additives offering improved corrosion protection, and biofouling resistance. Dispersing large proportions (40-70%) of Cu/Cu2O in ... -
Corrosion Behavior Of Zn-ni Coatings Deposited By Electrolytic Plasma Processing
(Materials Science & Engineering, 2009-09-16)In the current research project, three groups of Zn-Ni coatings of various Ni contents were deposited on comercial carbon steel by electrolytic plasma processing (EPP), a novel surface modification technique. The coating ... -
Design And Fabrication Of Piezoelectric Micro Generator Using Laser Micromachining And MEMS Technique
(Materials Science & Engineering, 2008-09-17)An energy harvesting device based on PbPb(Zr0.52Ti0.48)O3-Pb(Zn1/3Nb2/3)O3 ceramics was fabricated by using laser micromachining technique. It was found that the laser machining process did not have a significant effect ... -
Development And Analysis Of Low Calcium Flyash Based Geopolymer For Structural Applications
(Materials Science & Engineering, 2014-09-17)Geopolymers are an innovative ceramic material composed of long chains and networks of inorganic molecules are being used as an alternative to conventional Portland cement for infrastructure construction, replacement of ... -
Development Of Amphiphilic Biodegradable Photoluminescent Polymers
(Materials Science & Engineering, 2014-03-10)The development of amphiphilc block copolymers have been attracted much attention due to their potential use in drug delivery and targeting. Less research work focused on their prospective application as fluorescent imaging ... -
Development Of Multimodal Imaging System Combined With Laser Microbeam For Nanoscale Manipulation And Characterization.
(Materials Science & Engineering, 2011-10-11)Optical microscopy has fascinated biologists for probing and observing cellular structure while performing scientific research. While numerous wide-field and scanning microscopic techniques are being developed for probing ... -
Dispersion study of Metal-Organic Frameworks and Synthesis of MOF-High-density polyethylene fibers
(2023-05-19)Metal-Organic Frameworks (MOFs) are a highly versatile class of materials with a wide range of potential applications in gas storage, separation, catalysis, drug delivery, and sensing. The ability to tailor the properties ... -
DNA Based Thin Film As Hole Transport Layer In Bulk Heterojunction Polymer Solar Cells
(Materials Science & Engineering, 2007-09-17)In the field of organic solar cell, the conjugated polymer-fullerene bulk heterojunction concept is one of the ongoing research interests. In this work, the use of de-oxyribose nucleic acid/ hexadecyl trimethyl ammonium ... -
Effect Of Additive Morphology & Chemistry On Wear & Friction Of Greases Under Spectrum Loading
(Materials Science & Engineering, 12-10-2012)The primary focus of grease development is to minimize friction and improve on wear and load bearing capacity. Traditional method to evaluate wear behavior of grease is based on ASTM D2266 which evaluates the performance ... -
Effect Of Aging On The Transformation Of Phases In Solder Joint Of PBGA Packaging
(Materials Science & Engineering, 2010-07-19)This study investigates the microstructural characteristics of 3.0Ag-0.5Cu-Sn (SAC305) solder joint as in assembled state, and their evolution with aging treatment at 100 and 150°C for various hours. Specific aim of the ... -
Effect Of Reflow Variables On The Nanoscale Mechanical Properties Of Lead Free Solders
(Materials Science & Engineering, 2010-07-19)This study presents findings on the nano-mechanical properties of binary and ternary (Cu, Ag) - Sn Solders. Nanoindentation with a cube corner tip was used on Sn-Ag and SAC405 alloy compositions to investigate the effect ...