Search
Now showing items 21-30 of 32
Illustration Of Fundamentals Of Mechanical Vibration Using Computable Document Format
(Mechanical Engineering, 2012-07-25)
The main objective of this study is focused on the better understanding of the basic concepts of mechanical vibrations and its free and ready availability to the entire student community all over the globe.In this study ...
Spur Gear Analysis Using Mathcad
(Mechanical Engineering, 2012-07-25)
In gear manufacturing applications, it is required to calculate surface stress and bending stress with minimum error. This thesis represents engineering calculation of bending and surface compression of external teethed ...
CFD Based Aerodynamic Modeling To Study Flight Dynamics Of A Flapping Wing Micro Air Vehicle
(Aerospace Engineering, 2012-07-25)
The demand for small unmanned air vehicles, commonly termed micro air vehicles or MAV's, is rapidly increasing. Driven by applications ranging from civil search-and-rescue missions to military surveillance missions, there ...
High Speed Edgewise Rotor Computational Analysis And Optimization At High Inflow Velocities Achieved Through Forward Mast Tilt
(Aerospace Engineering, 2012-04-11)
Increased forward flight speed has long been the desire of the rotorcraft industry. Novel designs, such as compounds and tilt rotors have allowed for speed envelope expansion, but not without incurring performance hindrances ...
Evaporative Cooling Performance Of A Brazed Microporous Coating On An Aluminum Surface
(Mechanical Engineering, 2012-04-11)
The effect of an aluminum microporous coating on evaporative cooling performance was studied using distilled water as the working fluid. The aluminum microporous coating was fabricated by brazing aluminum particles to an ...
Determination Of Factors To Improve Effectiveness Of Triangulation Members For A Formula SAE Race Car Frame
(Mechanical Engineering, 2012-07-25)
This thesis suggests which factors have significant effect on the torsional and flexural stiffness of a space frame without contributing excessively to its weight. These factors are used as design variables to display ...
Stable Reference Trajectory Modification For Handling Actuator Failure In Control Systems
(Aerospace Engineering, 2012-04-11)
The issue of rapidly reconfiguring the reference trajectory under unanticipated actuator failures in order to regain lost performance or aircraft handling qualities is explored. The failures detected in real-time are ...
Numerical Study Of Drop Formation From Dripping To Jetting
(Mechanical Engineering, 2012-04-11)
The formation of liquid droplet from a capillary tube has been examined using numerical simulations. The dimensions of the capillary tube and the flow velocity have been varied to observe the regimes of drop formation. ...
Mode Truncation Analysis In Forced Response Of Structural Dynamics
(Mechanical Engineering, 2012-04-11)
Mode truncation in Modal analysis is an important problem and should be addressed with an effective truncation criterion. The truncation errors are considered as error forces and these error limits can be used to select ...
Thermal Behavior Of Dielectric Materials During Rapid Heating
(Mechanical Engineering, 2012-07-25)
The objective of this research is to understand the temperature variation in dielectric materials of different geometry. The work is divided into three major segments. The Thermal Wave model has been taken into consideration ...