Search
Now showing items 11-15 of 15
Experimental Study Of Laminated Composite Tubes Under Bending
(Materials Science & Engineering, 2007-08-23)
Bending stiffness of laminated composite tubes was determined experimentally using four-point bending test. The experimental results were compared with the results obtained by the laminated plate and smear property approaches. ...
Thermal Failure Mechanism And Voltammetry Metrology For Cu/barrier/low K Integration
(Materials Science & Engineering, 2007-08-23)
The present study investigates the thermal stability of Cu/barrier/porous low κ (PLK) integration first, and then a new characterization method based on voltammetry is developed to characterize quality of diffusion ...
Cathodic Electrodeposition Of Cadmium Oxide, Zinc Oxide And Mixed Cadmium Oxide-Zinc Oxide Thin Films
(Materials Science & Engineering, 2007-08-23)
Cadmium oxide (CdO) and (CdO)x(ZnO)1-x mixed semiconductor films were cathodically electrodeposited for the first time on F-doped SnO2 substrates. The CdO thin films were deposited from an aqueous 0.1 M KCl medium containing ...
Interactions Between Antiwear Agent And Novel Additive In Engine Oils
(Materials Science & Engineering, 2007-08-23)
Research has shown that side/end products of phosphorus and sulfur compounds in engine oils reduce effective life of exhaust catalysts of automobiles resulting in harmful emissions. Thus environmental regulations have been ...
Surface Modification Of 6H-SiC Under Vacuum Annealing Studied By Time Of Flight Positron Annihilation Induced Auger Electron Spectroscopy
(Materials Science & Engineering, 2007-08-23)
This thesis presents the first study of vacuum annealing of 6H- SiC surface using Time-of-Flight-Positron Annihilation induced Auger Electron Spectroscopy(TOF-PAES) . The study was the first application of a TOF-PAES ...