Search
Now showing items 1-10 of 110
Synthesis And Characterization Of Ferromagnetic Nanoparticles
(Materials Science & Engineering, 2008-04-22)
Ferromagnetic nanoparticles and their bimagnetic nanoparticles with uniform size distribution have drawn great attention in the past decades because of their unique magnetic properties and potential applications in high ...
Fabrication And Characterization Of Cobalt-Diamond-like-Carbon (Co-DLC) Nanocomposites
(Materials Science & Engineering, 2008-04-22)
In recent years, synthesis of magnetic nanocomposites has been receiving significant attention. These nanocomposites offer opportunities to develop active nanomaterials with various applications like magnetic data storage ...
Synthesis And Characterization Of Ferromagnetic Nanowires
(Materials Science & Engineering, 2011-03-03)
Ferromagnetic nanocrystals with shape anisotropy have drawn great attention in the past decades because of their unique magnetic properties and for their potential applications in ultra-high-density magnetic recording ...
A Study On The Corrosion Behavior Of Nanocrystalline Nickel In Aqueous Environments
(Materials Science & Engineering, 2011-07-14)
Nanocrystalline materials possess considerably enhanced properties arising from their small grain size. Significant interest has been paid in the past to their mechanical and physical properties. Very little attention ...
Design And Fabrication Of Piezoelectric Micro Generator Using Laser Micromachining And MEMS Technique
(Materials Science & Engineering, 2008-09-17)
An energy harvesting device based on PbPb(Zr0.52Ti0.48)O3-Pb(Zn1/3Nb2/3)O3 ceramics was fabricated by using laser micromachining technique. It was found that the laser machining process did not have a significant effect ...
Micromechanical Analysis Of Yielding For Particulate Filled Composites
(Materials Science & Engineering, 2007-08-23)
Particulate filled composites are hybrid materials which consist of particulates held together by a matrix. In this thesis, a simulation method to obtain overall failure criterion for particulate filled composites based ...
Synthesis And Tribological Properties Of DLC Film By RF PACVD: Effect Of Processing Parameters
(Materials Science & Engineering, 2010-07-19)
Diamond-like carbon (DLC) films, have gained grounds in many industries ranging from automobile and oil and gas to electronics and bio fields due to their low friction and wear rate, chemical inertness and high hardness. ...
Effect Of Aging On The Transformation Of Phases In Solder Joint Of PBGA Packaging
(Materials Science & Engineering, 2010-07-19)
This study investigates the microstructural characteristics of 3.0Ag-0.5Cu-Sn (SAC305) solder joint as in assembled state, and their evolution with aging treatment at 100 and 150°C for various hours. Specific aim of the ...
Solution Processed Optical Coatings For Solar Cell Applications
(Materials Science & Engineering, 2009-09-16)
In the recent past the demand for higher energy conversion efficiency of solar cells is on the rise. Extensive research is carrying out and many new methods have been proposed by changing either fabrication process or ...
Structural, Magnetic And Surface Properties Of RF Magnetron Sputtered Undoped Lanthanum Mangnite Thin Films
(Materials Science & Engineering, 2010-03-03)
In the present study, polycrystalline and epitaxial undoped Lanthanum Manganite (LMO) thin films were deposited by using RF magnetron sputtering on three substrates, Si (100), MgO (100) and LaAlO₃ (100) to study the influence ...