Browsing Library by Title
Now showing items 1739-1758 of 7484
-
DEVELOPMENT AND EVALUATION OF A BRAIN-COMPUTER INTERFACE FOR HUMAN-ROBOT INTERACTION IN SIMULATION AND HARDWARE ENVIRONMENTS
(2020-12-09)The aim of Brain-Computer Interface (BCI) research is to create a communication system that identifies human intent by processing brain signals with the objective to develop a control signal for an external device, in this ... -
Development and Flight Test of Moving-mass Actuated Unmanned Aerial Vehicle
(2016-05-20)Conventional airplane control is achieved by aerodynamic control surfaces by generating moments around all the three axes of the aircraft. Defections of the control surfaces have some disadvantages such as induced drag, ... -
DEVELOPMENT AND INVESTIGATION OF FLUORESCENCE IMAGING PROBES
(2019-09-03)Fluorescence imaging has attracted much attention due to high sensitivity, spatial and temporal resolution, and fast acquisition time, for imaging biomolecular processes and for diagnosis of diseases such as cancer in early ... -
Development And Operation Of An Integrated Sampling Probe And Gas Analyzer For Turbulent Mixing Studies In Complex Supersonic Flows
(Aerospace Engineering, 2013-10-22)For many aerospace applications, mixing enhancement between co-flowing streams has been identified as a critical and enabling technology. Due to short fuel residence times in scramjet combustors, combustion is limited by ... -
Development And Simulation Of Focus Of Attention Using Reinforcement Learning And Function Approximation
(Computer Science & Engineering, 2013-10-22)Without short-term memory, people would have little hope to learn and accomplish tasks. The same can be said for artificially intelligent agents. Often referred as Miller's Law, the number of working objects that a human ... -
Development and Testing of a Control strategy for dynamic cooling at Rack level in Data centers
(2020-01-09)Cooling is a critical part of data center’s infrastructure, and with ongoing demands in data processing and storage, thermal management issues are of great concern. Some imperative methods of removing heat are either using ... -
The Development And Testing Of Pulsed Detonation Engine Ground Demonstrators
(Aerospace Engineering, 2008-09-17)The successful implementation of a PDE running on fuel and air mixtures will require fast-acting fuel-air injection and mixing techniques, detonation initiation techniques such as DDT enhancing devices or a pre-detonator, ... -
The Development And Testing Of The Academic Information System Survey
(Landscape Architecture, 2008-09-17)The Academic Information System (AIS) is a database for academic administrators and educators in landscape architecture programs which are members of the Council of Educators in Landscape Architecture (CELA), an international ... -
Development And Validation Of A Group Based Dominance Scale
(Psychology, 2014-09-17)The goal of this project was to update the social dominance orientation (SDO) scale by creating a separate measure for its subfactor group based dominance (GBD), which is defined as how strongly a person feels one group ... -
Development And Validation Of TDR Based Sensors For Thermal Conductivity And Soil Suction Measurements
Simultaneous measurement of soil thermal conductivity, moisture content, dry density and soil suction is a challenging issue and very important to the design of geothermal related structures such as geothermal energy piles ... -
Development and Validation of the Deliquescent Relative Humidity Test Method For the Accumulated Particulate Matter Found in a Data Center Utilizing an Airside Economizer
(2018-05-17)Data centers are virtual or physical infrastructure utilized by enterprises to house computer, server and networking systems and other vital components for the needs of the company’s information technology mainly serving ... -
Development And Validation Of The Resilience Protective Factors Inventory: A Confirmatory Factor Analysis
(Social Work, 2013-07-22)The concept of resilience was empirically discovered over 40 years ago. Over the last several decades' researchers continued to generate a theoretical and empirical evidence base relative to the concept of resilience. ... -
Development Of A Broadband Multi-channel NIRS System For Quantifying Absolute Concentrations Of Hemoglobin Derivatives And Reduced Scattering Coefficients
(Biomedical Engineering, 2008-08-08)Near infrared spectroscopy (NIRS) has been widely applied to investigate hemoglobin oxygenations of muscles, brain and breast tumors. Steady state reflectance techniques developed previously have been restricted to ... -
Development Of A Conceptual Design Weight Estimation Method Library And Documentation
(Aerospace Engineering, 2014-07-14)The state of the art in estimating the volumetric size and mass of flight vehicles is held today by an elite group of engineers in the Aerospace Conceptual Design Industry. This is not a skill readily accessible or taught ... -
Development Of A Database And Selection Model For Optimum Retaining Wall Construction, Cost And Production
(Civil & Environmental Engineering, 2014-07-14)Retaining walls are earth retention elements that result essential in the majority of the construction projects for the overall project performance, as well as its budget and schedule. These elements constitute a key role ... -
DEVELOPMENT OF A DECESION TREE TO REHABILITATE OR REPLACE THE ST. FRANCIS BRIDGE OVER IH-30
(2022-12-19)**Please note that the full text is embargoed until 12/16/2024** ABSTRACT: The ASCE infrastructure report card indicated that about 42% of the nation’s bridges are over 50 years old, and 7.5% of the bridges are structurally ... -
The Development Of A Design Ontology For Products And Processes
(Industrial & Manufacturing Engineering, 2007-08-23)This research develops a methodology called, Design Knowledge Acquisition Process (DKAP) for creating ontology of product and process design using IDEF5 and to develop a consistency matrix for checking accuracy of captured ... -
Development Of A Detached Vital Sign Home Monitoring Management System
(Computer Science & Engineering, 2013-03-20)Patients coping with chronic illnesses are often inconvenienced with routine doctor visits for the sole purpose of conducting basic vital sign monitoring. Such visits tend to be disruptive, and are more so when the patient ... -
The Development Of A Finite Element Tool For The Calculation Of Beam Cross Section Properties
(Aerospace Engineering, 2008-09-17)Cross section properties are crucial in the analysis and design of beams as they play a key role in the determination of the stress state encountered. The development of an FEM tool in MATLAB for the calculation of beam ... -
Development Of A Flexible Pavement Design Procedure Based On The Mechanistic - Empirical Pavement Design Guide: A Case Study
(Civil & Environmental Engineering, 2013-03-20)This research developed design tables of new flexible pavement structures for New York State Department of Transportation based on the Mechanistic Empirical Design Guide (MEPDG). The design tables were developed using the ...