Search
Now showing items 21-30 of 54
Blocking Reader: Design And Implementation Of A Low-cost Passive UHF RFID Blocking Reader
(Electrical Engineering, 2010-03-03)
In this thesis I present a low-cost passive UHF ISO 18000-6C RadioFrequency Identification, or RFID, reader that is feasible for mobileand privacy applications. Low cost readers are necessary to achievethe promised cost ...
A High Fill Factor CMOS Image Sensor For IR Camera Applications
(Electrical Engineering, 2010-11-01)
In this thesis, a unit cell for high-SNR applications is presented. The proposed circuit is significantly smaller than other circuits that perform dark current subtraction because less circuitry is used inside the unit ...
Electrodeposited Cuprous Oxide Solar Cells
(Electrical Engineering, 2010-03-03)
The electrochemically deposited cuprous oxide (Cu₂O) as a photovoltaic absorber material is introduced in this work. The electrical, structural, and optical characteristics of electrodeposited Cu₂O are well investigated. ...
Preliminary Investigation Of Six Degree Of Freedom Human Steadiness Measurement Using A Performance Theory Framework
(Electrical Engineering, 2010-03-03)
Tremor is an undesired oscillatory movement of a body segment which limits a person's ability to accomplish tasks. A conceptually sound, single number measure reflecting steadiness (defined as the inverse of tremor) of ...
Detection and severity classification of rotor imbalance faults in induction machines
(Electrical Engineering, 2010-11-01)
As world economy continues to globalize, increased competition has lead to a reduction in profit margins. To remain competitive in such an economy, an industry needs to reduce the downtime of critical components even for ...
H.264 Standard Based Side Information Generation In Wyner-ziv Coding
(Electrical Engineering, 2010-07-19)
The traditional video coding involves a high complexity encoder and relatively low complexity decoder. The complexity of the encoder is mainly due to motion estimation [3] and other prediction techniques employed . There ...
Localization System For UAV/UGV In Urban Environments
(Electrical Engineering, 2010-03-03)
An implementation of relative localization of wireless sensor nodes using a potential field method is presented in this work. The system is designed to assist in UAV/UGV navigation in urban environments like rooms and ...
Analysis Of The Spatial Correlation Measurements For The Multiple Input Multiple Output (MIMO) Channel Using Anechoic Chamber Measurement Methodologies To Evaluate Over-The-Air (OTA) Testing Techniques
(Electrical Engineering, 2010-03-03)
There are numerous constraints in defining an Over-The-Air (OTA) test due to the practical hardware restrictions present in an anechoic chamber. It is necessary to evaluate the test signals used in OTA testing to verify ...
Design Of Microwave Non-redundant Band-pass Filter Using Microstrip And Edge Coupled Sections
(Electrical Engineering, 2010-03-03)
Microwave filler design using the non-redundant method relies on using the quarter wave Unit Elements (U.E's) to create a complex pole and hence augment the filter skirt response as against the redundant method wherein the ...
The Self-heating Effects Of Bipolar Juction Transistors On The Functionality Of A Current Feedback Amplifier
(Electrical Engineering, 2010-11-01)
Self-heating effects strongly affect the performance of modern silicon-on-insulator (SOI) bipolar junction transistors. This research work does an extensive analysis of self-heating effects on large-signal behavior, ...